SOPREMA
Where Innovation and Expertise Work For You
Busy Boys Roofing LTD Roofing Experts
THE SPIRIT OF INNOVATION
Always attentive to the professionals in the construction industry, SOPREMA is renowned as a pioneer for its new product development initiatives that meet and exceed the needs of its clients. The company was one of the first to develop automated systems for the installation of membranes, and was the first roofing manufacturer to incorporate vegetated roof concepts into their product line. Innovation at SOPREMA also involves active participation in the development of new industry standards.
SUSTAINABLE DEVELOPMENT
The SOPREMA R&D policy is strongly oriented towards sustainable development. For more than 20 years, SOPREMA has taken countless steps to limit the impact of its products and industrial activities on the environment, with a particular emphasis on renewable resources and developing environmentally friendly products, such as SOPRANATURE , COLPLY EF, SOPRASTAR and MAMMOUTH NEO .
Roofing & Waterproofing
Insulation
Vegetated Solutions
Soundproofing
Accessory Products
SOPREMA combines a comprehensive line of commercial roofing solutions with decades of proven performance. We manufacture roofing products such as industry-leading SBS-modified bitumen roofing membranes, polymeric PMMA/PMA liquid-applied membranes and synthetic single-ply PVC membranes. We're also a leading provider of roofing adhesive, roofing coatings such as mastics and primers, and various roofing fasteners. And choosing SOPREMA means choosing reliability. As a testimony to the trusted performance of its products, SOPREMA offers a complete warranty program that lives up to its reputation. For more information download the Standard Roofing Warranty Form. For superior adhesion on a variety of substrates, find out more about SOPREMA roofing applications.
ALSAN RS QUARTZ AGGREGATE
ALSAN RS Quartz Aggregate is mineral surfacing used to add a bond/wearing layer, a non-skid wearing surface, or to achieve an aesthetic finish. ALSAN RS Quartz Aggregate is washed, kiln-dried, dust-free, and angular grain quartz silica, and is available in a wide variety of colors.
View Data Sheet
ALSAN RS 276 PRIMER
ALSAN RS 276 Primer is a rapid-setting, proprietary formulation polymethyl methacrylate (PMMA) primer. ALSAN RS 276 Primer is utilized to promote adhesion over concrete, masonry, and other substrates prior to application of ALSAN RS roofing, waterproofing, and flashing systems.
View Data Sheet
ALSAN RS Cleaner
ALSAN RS Cleaner is a clear, blended solvent used to clean transition areas of in-place ALSAN RS liquid applied membranes at tie-ins, repairs and between staged coats of resins. ALSAN RS Cleaner is also used to clean and prepare plastic and metal surfaces prior to application of ALSAN RS membrane applications.
View Data Sheet
ALSAN RS VINYL CHIPS
ALSAN RS Vinyl Chips are solid, chemically inert, pigmented acrylic chips used to create decorative aesthetic finishes with ALSAN RS 287 Color Finish Base applications.
View Data Sheet
ALSAN RS 222 PRIMER
ALSAN RS 222 Primer is a rapid-setting, proprietary formulation polymethyl methacrylate (PMMA) primer. ALSAN RS 222 Primer is utilized to promote adhesion over asphaltic surfaces, roof cover boards, concrete, masonry, wood and other substrates prior to application of ALSAN RS roofing, waterproofing and flashing systems.
View Data Sheet
ALSAN RS TEXTURED COATING
ALSAN RS Textured Coating is a rapid-setting, proprietary formulation polymethyl methacrylate (PMMA) liquid resin with integrally mixed aggregate. ALSAN RS Textured Coating is used primarily with vehicular traffic installations at ramps, turning radii and areas of heavy use.
View Data Sheet
ALSAN RS LIQUID THIXO
ALSAN RS Liquid Thixo is a proprietary thixotropic agent used as an additive with ALSAN RS PMMA & PMA resins to increase resin viscosity. ALSAN RS Liquid Thixo is required with ALSAN RS 230, ALSAN RS 260 LO, ALSAN TRAFIK RS 733 Self-Leveling Mortar, ALSAN RS 263 LO Mortar, ALSAN RS 287 Color Finish Base, ALSAN TRAFIK RS 789 LT and ALSAN RS Textured Coating when applied on steep slopes or vertical substrates.
View Data Sheet
ALSAN RS 281 CLEAR FINISH
ALSAN RS 281 Clear Finish is a rapid-setting, proprietary formulation polymethyl methacrylate (PMMA) clear finish resin. ALSAN RS 281 Clear Finish is utilized as a sealer layer coat when colored silica quartz aggregate is used.
View Data Sheet
ALSAN RS 230 FIELD
ALSAN RS 230 Field is a high performance, rapid-setting, polymethyl methacrylate (PMMA) liquid resin. ALSAN RS 230 Field is catalyzed with ALSAN RS catalyst powder and combined with ALSAN RS Fleece reinforcing fabric to form a flexible, monolithic, reinforced membrane.
View Data Sheet
ALSAN RS 260 LO FLASH
ALSAN RS 260 LO Flash is a high performance, low odor, rapid-setting, polymethacrylate (PMA) liquid resin for use in flashing applications. ALSAN RS 260 LO Flash is catalyzed with ALSAN RS catalyst powder and combined with ALSAN RS Fleece reinforcing fabric to form a flexible, monolithic, reinforced membrane.
View Data Sheet
ALSAN RS 260 LO FIELD
ALSAN RS 260 LO Field is a high performance, low odor, rapid-setting, polymethacrylate (PMA) liquid resin. ALSAN RS 260 LO Field is catalyzed with ALSAN RS catalyst powder and combined with ALSAN RS Fleece to form a flexible, monolithic, reinforced membrane.
View Data Sheet
ALSAN RS FLEECE
ALSAN RS Fleece is a proprietary non-woven polyester reinforcement used in ALSAN RS liquid membrane applications. ALSAN RS Fleece is available in a roll or in pre-cut detail kits for corners and small and large pipes.
View Data Sheet
ALSAN RS PASTE
ALSAN RS Paste is a rapid-setting, proprietary formulation polymethyl methacrylate (PMMA) heavy paste. ALSAN RS Paste is used to fill small cracks, depressions and voids in a nontraffic bearing horizontal or vertical substrates after priming and prior to application of ALSAN RS systems.
View Data Sheet
ALSAN PRE-CUT FLEECE
ALSAN Fleece is a proprietary non-woven polyester reinforcement used in ALSAN RS liquid membrane or ALSAN Flashing applications.
View Data Sheet
ALSAN RS DETAILER
ALSAN RS Detailer is a micro-fiber enhanced rapid-setting polymethyl methacrylate (PMMA) flashing resin. ALSAN RS Detailer is used for waterproofing small and difficult penetrations where a standard ALSAN RS fully reinforced liquid membrane may not be applied. ALSAN RS Detailer should not be used in locations where movement is anticipated.
View Data Sheet
ALSAN RS 287 COLOR FINISH BASE
ALSAN RS 287 Color Finish Base is a rapid-setting proprietary formulation polymethyl methacrylate (PMMA) liquid resin. ALSAN RS 287 Color Finish Base is an un-pigmented resin that must be mixed with a pre-measured and packaged ALSAN RS Color Additive.
View Data Sheet
ALSAN RS CATALYST POWDER
ALSAN RS Catalyst Powder 50% is a reactive agent used to induce curing of ALSAN RS resin products.
View Data Sheet
ALSAN RS 230 FLASH
ALSAN RS 230 Flash is a high performance, rapid-setting, polymethyl methacrylate (PMMA) liquid resin for use in flashing applications. ALSAN RS 230 Flash is catalyzed with ALSAN RS catalyst powder and combined with ALSAN RS Fleece to form a flexible, monolithic, reinforced membrane.
View Data Sheet
ALSAN RS LO PRIMER
ALSAN RS LO Primer is a 100% solids, low-odor epoxy used to promote adhesion to Metals (excluding copper), concrete, masonry, wood, and other substrates prior to application of ALSAN RS roofing, waterproofing, and trafficable surfacing systems. ALSAN RS LO Primer is also used with SOPREMA ALSAN RS 260 LO Field, ALSAN RS 260 LO Flash and ALSAN RS 263 LO Self-Leveling Mortar for low-odor applications.
View Data Sheet
DUOTACK SPF HFO ADHESIVE
DUOTACK SPF HFO Adhesive is a low pressure, two-component spray polyurethane foam adhesive formulated for adhering SENTINEL HFB (heavy fleece back) membranes, insulation and coverboard to approved substrates. DUOTACK SPF HFO Adhesive was developed to provide a much quicker and easier application in order to save time and money for rooftop projects.
View Data Sheet
SENTINEL SILVER ART VINYL COATED METAL
SENTINEL VCM is a 24 gauge (0.6 mm) galvanized metal sheet with a 20 mil SENTINEL PVC membrane laminated to one side.
View Data Sheet
SENTINEL VCM
ENTINEL VCM is a 24 gauge (0.6 mm) galvanized metal sheet with a 20 mil SENTINEL PVC membrane laminated to one side.
View Data Sheet
SENTINEL WALKWAY PAD
SENTINEL Walkway Pad protects roof membranes from damage caused by necessary foot traffic or accidental tool drops. This product is compatible with SENTINEL PVC roof membranes and can be applied to new or existing roofs using standard hot air welding equipment.
View Data Sheet
SENTINEL COPPER ART VINYL COATED METAL
SENTINEL VCM is a 24 gauge (0.6 mm) galvanized metal sheet with a 20 mil SENTINEL PVC membrane laminated to one side.
View Data Sheet
SENTINEL PROFILE BARS
SENTINEL Profile Bars are extruded, pliable PVC bars designed to provide PVC membrane with the appearance of a standing seam metal roof. They are available in white, copper and silver. Each profile is 1.2 inches (31 cm) in height, 1.3 inches in width (1.8 cm) and 9.8 feet in length (3 m). Each profile has a weld base of 1.35 inches (34 mm) to attach the bar to the membrane.
View Data SheetDUOTACK SPF ADHESIVE
DUOTACK SPF Adhesive is a low pressure, two-component spray polyurethane foam adhesive specially formulated by SOPREMA for adhering SENTINEL HFB membranes to approved substrates in a spatter pattern as well as a ribbon applied adhesive for adhering insulation and coverboards to approved substrates or together.
View Data Sheet
SENTINEL UNIVERSAL SEALANT
SENTINEL Universal Sealant is a moisture cured, polyether, elastomeric sealant for use in approved SENTINEL PVC membrane and flashing assemblies. SENTINEL Universal Sealant is a solvent-free sealant that has excellent adhesive qualities and resilient elastomeric properties and is formulated to bond to most construction materials.
View Data Sheet
SENTINEL S BONDING ADHESIVE
SENTINEL S Bonding Adhesive is a solvent based contact adhesive specially designed for adhering bare backed SENTINEL PVC membranes and flashings to a variety of substrates for horizontal or vertical applications. SENTINEL S is expressly formulated to provide superior bonding strength while meeting all VOC restrictions and regulations.
View Data Sheet
SENTINEL H2O BONDING ADHESIVE
SENTINEL H2O Bonding Adhesive is a water-based polymeric adhesive specially designed for adhering SENTINEL PVC membranes and flashings to a variety of substrates for horizontal applications. SENTINEL H2O is expressly formulated to provide superior bonding strength with a low VOC content.
View Data Sheet
SENTINEL P150
SENTINEL P150 is a high performance, polyester reinforced, thermoplastic polyvinyl chloride (PVC) roof membrane, specially designed to provide unmatched flexibility and long-term performance. SENTINEL membranes provide the proven fire and chemical resistance of PVC along with superior weldability, making it easy to conform to complex geometries.
View Data Sheet
SENTINEL P150 HFB
SENTINEL P150 HFB is a high performance, polyester reinforced, thermoplastic polyvinyl chloride (PVC) roof membrane, specially designed to provide unmatched flexibility and long-term performance. SENTINEL membranes provide the proven fire and chemical resistance of PVC along with superior weldability, making it easy to conform to complex geometries.
View Data Sheet
SENTINEL P200
SENTINEL P200 is a high performance, polyester reinforced, thermoplastic polyvinyl chloride (PVC) roof membrane, specially designed to provide unmatched flexibility and long-term performance. SENTINEL membranes provide the proven fire and chemical resistance of PVC along with superior weldability, making it easy to conform to complex geometries.
View Data Sheet
SENTINEL P200 HFB
SENTINEL P200 is a high performance, polyester reinforced, thermoplastic polyvinyl chloride (PVC) roof membrane, specially designed to provide unmatched flexibility and long-term performance. SENTINEL membranes provide the proven fire and chemical resistance of PVC along with superior weldability, making it easy to conform to complex geometries.
View Data Sheet
SENTINEL COPPER ART P150 HFB
SENTINEL Copper Art P150 HFB is a high performance, polyester reinforced, thermoplastic polyvinyl chloride (PVC) roof membrane, specially designed to provide unmatched flexibility and long-term performance. SENTINEL membranes provide the proven fire and chemical resistance of PVC along with superior weldability, making it easy to conform to complex geometries.
View Data Sheet
SENTINEL SILVER ART P150
SENTINEL Silver Art P150 utilizes a specialized process that allows aluminum metallic powder to incorporate into PVC blend, producing a non-pigmented aluminum-PVC membrane that will not chalk or fade. SENTINEL Silver Art P150 provides the aesthetics of an aluminum roof while incorporating SOPREMA's ACRYLIC SHIELDTM technology to ensure the aluminum will not oxidize, but rather maintain its color.
View Data Sheet
SENTINEL COPPER ART P150
SENTINEL Copper Art P150 utilizes a specialized process that allows copper metallic powder to incorporate into the PVC blend, producing a non-pigmented copper-PVC membrane that will not chalk or fad. SENTINEL Copper Art P150 not only provides the aesthetics of a copper roof, but it will also oxidize gradually, taking on the patina color, just as copper does, when exposed to the elements.
View Data Sheet
SENTINEL SILVER ART P150 HFB
SENTINEL Silver Art P150 HFB is a high performance, polyester reinforced, thermoplastic polyvinyl chloride (PVC) roof membrane featuring a fleece backed underside. SENTINEL PVC P150 HFB is inherently fire and chemical resistant, heat weldable, and is specifically designed for use in flat and vertical applications.
View Data Sheet
ALSAN COATING UNIVERSAL PRIMER
ALSAN Coating Universal Primer is a highly engineered, single component, water-based primer designed for application over aged single plies (TPO, PVC & EPDM) and various common metal substrates like Galvalume, Galvanized Steel, Aluminum, and other common roofing substrates - including difficult to adhere to membranes or surfaces.
View Data Sheet
SOPRALASTIC 123
SOPRALASTIC 123 is a black waterproofing coating composed of elastomeric bitumen, mineral fillers and solvents. SOPRALASTIC 123 is used to revitalize existing roofs in order to offer a better protection and to prolong their service life. It may be used on asphalt roofs and metal surfaces. It must be protected in all cases, either by a coat of SOPRALASTIC 124 ALU or small gravel.
View Data Sheet
SOPRALASTIC 124 ALU
SOPRALASTIC 124 ALU is a high performance proprietary elastomeric bitumen waterproofing coating with aluminum leafing pigmentation used for revitalizing and protecting waterproofing membranes. SOPRLASTIC 124 ALU may also be used to protect surfaces of sanded membranes and SOPRALASTIC 123 against UV rays.
View Data Sheet
SOPRALASTIC 124 ALU
SOPRALASTIC 124 ALU is a high performance proprietary elastomeric bitumen waterproofing coating with aluminum leafing pigmentation used for revitalizing and protecting waterproofing membranes. SOPRLASTIC 124 ALU may also be used to protect surfaces of sanded membranes and SOPRALASTIC 123 against UV rays.
View Data SheetALSAN COATING SIL 402 FLASHING
ALSAN Coating SIL 402 Flashing is a VOC compliant, high solids, single component, low sag, silicone mastic used to prepare seams, penetrations, and fasteners for coating with ALSAN Coating SIL 402. Upon cure, ALSAN Coating SIL 402 Flashing forms a durable weatherproof seal, prepping the surface for application of ALSAN Coating SIL 402.
View Data Sheet
ALSAN COATING AC 401 FLASHING
ALSAN Coating AC 401 Flashing is a VOC compliant high quality single component plasticizer free water based acrylic elastomeric roof coating and protective barrier for a variety of architectural surfaces and substrates. Upon cure, ALSAN Coating AC 401 Flashing forms a durable weatherproof coating that is highly flexible and resistant natural weathering with excellent adhesion to most surfaces including metals, concrete, wood and asphaltic materials.
View Data Sheet
ALSAN COATING ASPHALT BLEED BLOCKING PRIMER
ALSAN Coating Asphalt Bleed Blocking Primer is a VOC compliant single component plasticizer free water based acrylic primer/basecoat used to enhance adhesion and block bleed through discoloration from asphalt and asphalt based substrates such as BUR, modified bitumen and asphalt cap sheets.
View Data Sheet
ALSAN COATING BUTYL FLEECE TAPE
ALSAN Coating Butyl Fleece Tape contains a butyl rubber compound with a polyester fleece face used where required or recommended as reinforcement to enhance tensile strength, tear resistance, elongation, and performance of ALSAN Coating SIL 402 and ALSAN Coating AC 401 applications. ALSAN Coating Butyl Fleece Tape is typically used to treat laps, joints, seams flashings and repairs on metal, single ply and smooth asphalt based roof systems.
View Data Sheet
ALSAN COATING sIl 402 Walkway
ALSAN Coating SIL 402 Walkway Grade is a safety yellow VOC compliant, high solids, single component, moisture curing, silicone rubber coating used to enhance impact resistance where required at walkways and around mechanical equipment. This product comes in a standard color of safety yellow.
View Data Sheet
ALSAN COATING AC 401
ALSAN Coating AC 401 is a VOC compliant, high quality, single component, plasticizer-free, water-based, acrylic elastomeric roof coating and protective barrier for a variety of low slope roof surfaces and substrates. Upon cure, ALSAN Coating AC 401 forms a durable, reflective coating that is highly flexible and resistant to natural weathering with excellent adhesion.
View Data Sheet
ALSAN COATING SIL 402
LSAN Coating SIL 402 is a VOC compliant, high solids, single component, silicone roof coating and protective barrier for a variety of low slope roof surfaces and substrates. Upon cure, ALSAN Coating SIL 402 forms a durable, weatherproof coating that is highly resistant to degradation from UV and natural weathering.
View Data Sheet
SOPRA-XPS 40
SOPRA-XPS 40 is a rigid thermal insulation board made of high-density extruded polystyrene with squared edges on its four sides. It is composed of closed cell foam. SOPRA-XPS 40 is designed for applications requiring high-density insulation on which heavy loads will be applied. It is mainly used for SOPREMA foundation systems under slabs, protected-membrane roofing systems (inverted), parking decks, and plaza decks.
View Data Sheet
2-1 SOPRASMART ISO HD
2-1 SOPRASMART ISO HD is a high performance panel of an SBS-modified bitumen base membrane and high density polyisocyanurate insulation board for use in approved multi-ply membrane assemblies.
View Data Sheet
3-1 SOPRASMART BOARD
3-1 SOPRASMART BOARD is a high performance panel of an SBS-modified bitumen base membrane, SOPRABOARD asphaltic coverboard and two inches of SOPRA-ISO polyisocyanurate insulation for use in approved multi-ply membrane assemblies.
View Data Sheet
2-1 SOPRASMART ROCK
2-1 SOPRASMART ROCK is a high performance panel composed of an SBS-modified bitumen base membrane and HD SOPRAROCK high density mineral wool board for use in approved multi-ply membrane assemblies.
View Data Sheet2-1 SOPRASMART BOARD
2-1 SOPRASMART BOARD is a high performance panel of an SBS-modified bitumen base membrane and SOPRABOARD asphaltic coverboard for use in approved multi-ply membrane assemblies.
View Data Sheet
3-1 SOPRASMART ROCK
3-1 SOPRASMART ROCK is a high performance panel of an SBS-modified bitumen base membrane, SOPRAROCK mineral wool board, and polyisocyanurate insulation board for use in approved multi-ply membrane assemblies.
View Data Sheet
2-1 SOPRASMART BOARD
2-1 SOPRASMART BOARD is a high performance panel of an SBS-modified bitumen base membrane and SOPRABOARD asphaltic coverboard for use in approved multi-ply membrane assemblies.
View Data Sheet
3-1 SOPRASMART ROCK
3-1 SOPRASMART ROCK is a high performance panel of an SBS-modified bitumen base membrane, SOPRAROCK mineral wool board, and polyisocyanurate insulation board for use in approved multi-ply membrane assemblies.
View Data Sheet
SOPRA-XPS 35
SOPRA-XPS 35 is a rigid thermal insulation board made of extruded polystyrene with shiplap or square edges on all four sides. It is composed of closed cell foam. It is mainly used as a thermal insulation for SOPREMA protected-membrane roofing systems (inverted roofs). Compliant with ASTM C578-14, Type IV.
View Data Sheet
SOPRA-XPS 100
SOPRA-XPS 100 is a rigid thermal insulation board made of high-density extruded polystyrene with squared edges on its four sides. It is composed of closed cell foam. SOPRA-XPS 100 is designed for applications requiring high-density insulation on which heavy loads will be applied. It is mainly used for SOPREMA foundation systems under slabs, protected-membrane roofing systems (inverted), parking decks, and plaza decks.
View Data Sheet
SOPRA-XPS 60
SOPRA-XPS 60 is a rigid thermal insulation board made of high-density extruded polystyrene with squared edges on its four sides. It is composed of closed cell foam. SOPRA-XPS 60 is designed for applications requiring high-density insulation on which heavy loads will be applied. it is mainly used for SOPREMA foundation systems under slabs, protected-membrane roofing systems (inverted), parking decks, and plaza decks.
View Data Sheet
SOPRA-ISO +
SOPRA-ISO+ is a rigid polyisocyanurate thermal insulation panel for use in approved multi-ply membrane and flashing assemblies. SOPRA-ISO+ is composed of closed cell polyisocyanurate foam bonded to inorganic coated glass mat facers on the top and underside. Available in both board stock and tapered panels.
View Data Sheet
SOPRAROCK DD
SOPRAROCK DD (dual density) is a rigid mineral fiber insulation for use in approved multi-ply membrane and flashing assemblies. SOPRAROCK DD is composed of basalt rock and slag, that when combined, results in insulation with an extremely high melting point. SOPRAROCK DD is water repellent yet vapor permeable and has a higher density top surface.
View Data Sheet
SOPRA-ISO HD
SOPRA-ISO HD is a high density rigid polyisocyanurate panel designed for use as a cover board in approved multi-ply membrane and flashing assemblies. SOPRA-ISO HD is composed of closed cell polyisocyanurate foam bonded to inorganic coated glass mat facers on the top and underside.
View Data Sheet
SOPRAROCK Cant Strips
SOPRAROCK Cant Strips are mineral wool fiber insulations made from basalt rock and slag. This combination results in a noncombustible product with a melting point of approximately 2150 F (1177 C), which gives it excellent fire resistance properties. They are comprised of mineral wool, which is a water repellent yet vapor permeable material.
View Data Sheet
SOPRA-ISO
SOPRA-ISO is a rigid polyisocyanurate thermal insulation panel for use in approved multi-ply membrane and flashing assemblies. SOPRA-ISO is composed of closed cell polyisocyanurate foam bonded to fiber reinforced/organic mat facers on the top and underside. Available in both board stock and tapered panels.
View Data Sheet
DUOTACK 365
DUOTACK 365 is a low rise, two component polyurethane adhesive. DUOTACK 365 is used to adhere insulation and cover boards to approved substrates. Insulation and cover boards include polyisocyanurate, polystyrene, mineral fiber, gypsum, wood fiber, cement, perlite and asphaltic roof boards. DUOTACK 365's unique chemistry provides for a versatile quick setting adhesive that is not susceptible to low relative humidity or temperature.
View Data Sheet
SOPRABOARD
SOPRABOARD is a semi rigid, asphaltic roofing substrate board for use in approved multi-ply membrane and flashing assemblies. SOPRABOARD is composed of a mineral fortified asphaltic core formed between two fiberglass reinforcing plies. SOPRABOARD is designed for use with SOPREMA 's SBS-modified bitumen membranes and may be used as a protection board in SOPREMA's waterproofing systems and assemblies.
View Data Sheet
ALSAN RS 276 PRIMER
ALSAN RS 276 Primer is a rapid-setting, proprietary formulation polymethyl methacrylate (PMMA) primer. ALSAN RS 276 Primer is utilized to promote adhesion over concrete, masonry, and other substrates prior to application of ALSAN RS roofing, waterproofing, and flashing systems
View Data Sheet
ELASTOCOL STICK H2O
ELASTOCOL Stick H2O is water based polymer emulsion primer for use in approved multi-ply membrane and flashing assemblies. ELASTOCOL Stick H2O is used to increase adhesion when using self-adhered SBS membranes. ELASTOCOL Stick H2O may be applied to concrete, gypsum, masonry, metal, wood and SOPREMA mineral aggregate surfaced membranes.
View Data Sheet
ELASTOCOL 350
ELASTOCOL 350 is a zero VOC, water based primer for use in approved multi-ply membrane and flashing assemblies. ELASTOCOL 350 is a proprietary polymer emulsion zero VOC primer used to increase adhesion when using heat welding, cold adhesive or hot asphalt application methods.
View Data Sheet
ALSAN RS 222 Primer
ALSAN RS 222 Primer is a rapid-setting, proprietary formulation polymethyl methacrylate (PMMA) primer. ALSAN RS 222 Primer is utilized to promote adhesion over asphaltic surfaces, roof cover boards, concrete, masonry, wood and other substrates prior to application of ALSAN RS roofing, waterproofing and flashing systems.
View Data Sheet
ELASTOCOL 500
ELASTOCOL 500 is an asphalt based primer for use in approved multi-ply membrane and flashing assemblies. ELASTOCOL 500 is composed of a proprietary blend of asphalt, solvents and additives used to increase adhesion when using heat welding, cold adhesive or hot asphalt application methods.
View Data Sheet
ELASTOCOL STICK
ELASTOCOL Stick is an SBS polymer based primer for use in approved multi-ply membrane and flashing assemblies. ELASTOCOL Stick is comprised of a proprietary blend of SBS polymers, solvents and additives used to increase adhesion when using self-adhered SBS membranes. ELASTOCOL Stick may be applied to gypsum, masonry, metal, wood and SOPREMA mineral aggregate surfaced membranes
View Data Sheet
ELASTOCOL STICK ZERO
ELASTOCOL Stick Zero is a zero VOC polymer based primer for use in approved multi-ply membrane and flashing assemblies. ELASTOCOL Stick Zero is composed of a proprietary blend of polymers, solvents and additives used to increase adhesion when using self-adhered SBS membranes.
View Data SheetALSAN RS LO Primer
ALSAN RS LO Primer is a 100% solids, low-odor epoxy used to promote adhesion to Metals (excluding copper), concrete, masonry, wood, and other substrates prior to application of ALSAN RS roofing, waterproofing, and trafficable surfacing systems.
View Data Sheet
LASTOBOND SHIELD HT
LASTOBOND Shield HT is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen in combination with high tack self-adhesive. The topside is surfaced with a high strength tri-laminate polyethylene film and the underside is surfaced with protective polyolefin release film that is removed during application.
View Data Sheet
SOPRA IV
SOPRA IV is a bitumen-coated base sheet for use in built up roof assemblies. SOPRA IV is composed of a proprietary formulation of bitumen and is reinforced with a high quality random glass fiber mat. The topside and underside are surfaced with fine mineral aggregate.
View Data Sheet
SOPRA VI
SOPRA VI is a bitumen-coated base sheet for use in approved built up roof assemblies. SOPRA VI is composed of a proprietary formulation of bitumen and is reinforced with a high quality random glass fiber mat. The topside and underside are surfaced with fine mineral aggregate to facilitate hot asphalt applications.
View Data Sheet
MODIFIED SOPRA G
MODIFIED SOPRA G is an SBS-modified bitumen-coated base sheet for use as an anchor sheet for cold adhesive or heat welded roof assemblies. MODIFIED SOPRA G is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen and is reinforced with a high quality random glass fiber mat. The topside and underside are surfaced with fine mineral aggregate.
View Data Sheet
SOPRABASE S
SOPRABASE S is an SBS modified bitumen-coated polyester-reinforced base sheet for use in multi-ply membrane assemblies. SOPRABASE S may be utilized as a mechanically fastened anchor sheet or adhered in approved multi-ply membrane assemblies. SOPRABASE S is manufactured with a sand parting agent applied to the top and bottom surfaces, and with laying lines printed on the top surface.
View Data Sheet
SOPRABASE TG
SOPRABASE TG is an SBS modified bitumen, polyester-reinforced base sheet for use in multi-ply membrane assemblies. The underside has a sanded surface for cold adhesive or mechanically fastened applications. The top is surfaced with polyolefin burn-off film for torching/heat welding applications.
View Data SheetSOPRABASE TG
SOPRABASE TG is an SBS modified bitumen, polyester-reinforced base sheet for use in multi-ply membrane assemblies. The underside has a sanded surface for cold adhesive or mechanically fastened applications. The top is surfaced with polyolefin burn-off film for torching/heat welding applications.
View Data Sheet
SOPRAVAP'R
SOPRAVAP'R is an SBS-modified bitumen vapor barrier for use in approved multi-ply membrane and flashing assemblies. SOPRAVAP'R is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen in combination with a high tack self-adhesive specifically designed for use with steel decks. The topside is surfaced with high strength tri-laminate polyethylene film and the underside is surfaced with protective polyolefin release film that is removed during application.
View Data Sheet
SOPRALENE ULTRA-STICK FR GR
SOPRALENE ULTRA-STICK FR GR is composed of a proprietary formulation of elastomeric styrene butadiene-styrene (SBS) polymer modified bitumen in combination with a specifically formulated, high tack self-adhesive bottom layer and is reinforced with a tough, dimensionally stable non-woven polyester mat. The topside is surfaced with ceramic coated granules and the underside is surfaced with a protective embossed split back release film that is removed during application.
View Data Sheet
BITUTAK SA BASE
BITUTAK SA BASE is a self-adhering waterproofing membrane composed of a tough polyester reinforcement that is saturated and coated on both sides with bituminous asphalt. The topside is covered with fine mineral particles for enhanced traction during application, and the self-adhesive underside is protected with a siliconized release film that is easily removed before application.
View Data Sheet
ELASTOPHENE FLAM 2.2
ELASTOPHENE Flam 2.2 is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen and is reinforced with a high quality random glass fiber mat. The topside and underside are surfaced with polyolefin burn-off film to optimize heat welding.
View Data Sheet
ELASTOPHENE FLAM FR+ GR
ELASTOPHENE Flam FR+ GR is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen and is reinforced with high quality random glass fiber mat. The topside is surfaced with ceramic coated granules and the underside is surfaced with polyolefin burn-off film to optimize heat welding.
View Data Sheet
ELASTOPHENE FR GR
ELASTOPHENE FR GR is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen and is reinforced with a high quality random glass fiber mat. The topside is surfaced with ceramic coated granules and the underside is surfaced with fine mineral aggregate to facilitate cold adhesive application.
View Data Sheet
COLVENT 180 TG
COLVENT 180 TG is composed of non-woven polyester reinforcement and a proprietary high quality elastomeric styrene-butadiene-styrene (SBS) polymer-modified bitumen blend. The underside consists of ribbon strips of SBS modified bitumen covered by plastic burn-off film for heat welding to approved substrates. The 3 in side-laps on the top and underside are surfaced with plastic burn-off film for heat welding side-laps watertight.
View Data Sheet
COLVENT TG
COLVENT TG is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen in combination with partially adhered ribbons and is reinforced with a high quality random glass fiber mat. The ribbon strips are arranged in a pattern to vent vapor pressure between the substrate and the COLVENT TG.
View Data Sheet
COLVENT FLAM 180 FR GR
COLVENT Flam 180 FR GR is composed of a elastomeric styrene-butadiene-styrene (SBS) polymer-modified bitumen blend and a non-woven polyester reinforcement. The underside consists of ribbon strips of SBS modified bitumen surfaced with plastic burn-off film for torching the ribbons to approved substrates.
View Data Sheet
COLVENT FLAM 180 TG
COLVENT Flam 180 TG is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen in combination with partially adhered ribbons and is reinforced with a tough, dimensionally stable non-woven polyester mat.
View Data SheetCOLVENT FLAM 180 FR GR
COLVENT Flam 180 FR GR is composed of a elastomeric styrene-butadiene-styrene (SBS) polymer-modified bitumen blend and a non-woven polyester reinforcement. The underside consists of ribbon strips of SBS modified bitumen surfaced with plastic burn-off film for torching the ribbons to approved substrates.
View Data SheetCOLVENT FLAM 180 TG
COLVENT Flam 180 TG is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen in combination with partially adhered ribbons and is reinforced with a tough, dimensionally stable non-woven polyester mat. The ribbon strips are arranged in a pattern to vent vapor pressure between the substrate and the COLVENT Flam 180 TG. The topside and underside are surfaced with polyolefin burn-off film to optimize heat welding.
View Data Sheet
COLVENT FLAM TG
COLVENT Flam TG is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen in combination with partially adhered ribbons and is reinforced with a high quality random glass fiber mat. The ribbon strips are arranged in a pattern to vent vapor pressure between the substrate and the COLVENT Flam TG. The topside and underside are surfaced with polyolefin burn-off film to optimize heat welding.
View Data Sheet
ELASTOPHENE FLAM HR FR GR
ELASTOPHENE Flam HR FR GR is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen and is reinforced with high performance glass scrim. The topside is surfaced with ceramic coated granules and underside is surfaced with polyolefin burn-off film to optimize heat welding.
View Data Sheet
ELASTOPHENE HR SANDED 2.2
ELASTOPHENE HR Sanded 2.2 is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen and is reinforced with high performance glass scrim. The topside and underside are surfaced with fine mineral aggregate to facilitate cold adhesive application.
View Data Sheet
ELASTOPHENE HR SANDED 3.0
ELASTOPHENE HR Sanded 3.0 is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen and is reinforced with high performance glass scrim. The topside and underside are surfaced with fine mineral aggregate to facilitate cold adhesive application.
View Data Sheet
ELASTOPHENE FLAM HR 3.0
ELASTOPHENE Flam HR 3.0 is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen and is reinforced with high performance glass scrim. The topside and underside are surfaced with polyolefin burn-off film to optimize heat welding.
View Data Sheet
ELASTOPHENE HR FR GR
ELASTOPHENE HR FR GR is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen and is reinforced with high performance glass scrim. The topside is surfaced with ceramic coated granules and the underside is surfaced with fine mineral aggregate to facilitate cold adhesive application.
View Data Sheet
ELASTOPHENE FLAM HR 2.2
ELASTOPHENE Flam HR 2.2 is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen and is reinforced with high performance glass scrim. The topside and underside are surfaced with polyolefin burn-off film to optimize heat welding.
View Data Sheet
SOPRALENE FLAM 180 FR+ GR
SOPRALENE Flam 180 FR+ GR is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen and is reinforced with tough, dimensionally stable non-woven polyester mat. The topside is surfaced with ceramic coated granules and underside is surfaced with polyolefin burn-off film to optimize heat welding.
View Data Sheet
SOPRA 4897
SOPRA 4897 is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen and is reinforced with a high quality random glass fiber mat. The topside is surfaced with fine mineral aggregate while the underside is surfaced with mineral granules to facilitate venting characteristics.
View Data Sheet
ELASTOPHENE FLAM HS
ELASTOPHENE Flam HS is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen and is reinforced with tough, dimensionally stable composite polyester/glass fiber reinforcement. The topside and underside are surfaced with polyolefin burn-off film to optimize heat welding.
View Data Sheet
ELASTOPHENE HS SANDED
ELASTOPHENE HS Sanded is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen and is reinforced with a tough, dimensionally stable composite polyester/glass fiber reinforcement. The topside and underside are surfaced with fine mineral aggregate to facilitate cold adhesive application.
View Data Sheet
ELASTOPHENE FLAM HS FR GR
ELASTOPHENE Flam HS FR GR is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen and is reinforced with a tough, dimensionally stable composite polyester/glass fiber reinforcement. The topside is surfaced with ceramic coated granules and the underside is surfaced with polyolefin burn-off film to optimize heat welding.
View Data Sheet
SOPRALENE 180 SP 3.0
SOPRALENE 180 SP 3.0 is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen and is reinforced with a tough, dimensionally stable non-woven polyester mat. The topside is surface with fine mineral aggregate and underside is surfaced with polyolefin burn-off film to optimize heat welding
View Data Sheet
SOPRALENE 250 FR GR HC
SOPRALENE 250 FR GR HC is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen and is reinforced with tough, dimensionally stable non-woven polyester mat specifically designed for use as a cap sheet over built up roofing. The topside is surfaced with ceramic coated granules and the underside is surfaced with fine mineral aggregate to facilitate cold adhesive application.
View Data Sheet
SOPRALENE 250 FR+ GR
SOPRALENE 250 FR+ GR is composed of a proprietary formulation of elastomeric styrene-butadienestyrene (SBS) polymer modified bitumen and is reinforced with a tough, dimensionally stable non-woven polyester mat. The topside is surfaced with ceramic coated granules and the underside is surfaced with fine mineral aggregate to facilitate cold adhesive application.
View Data Sheet
SOPRALENE FLAM 250 FR+ GR
SOPRALENE Flam 250 FR+ GR is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen and is reinforced with tough, dimensionally stable non-woven polyester mat. The topside is surfaced with ceramic coated granules and underside is surfaced with polyolefin burn-off film to optimize heat welding.
View Data Sheet
ELASTOPHENE SP 3.0
ELASTOPHENE SP 3.0 is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen and is reinforced with a high quality random glass fiber mat. The topside is surface with fine mineral aggregate and underside is surfaced with polyolefin burnoff film to optimize heat welding.
View Data Sheet
ELASTOPHENE FLAM FR GR
ELASTOPHENE Flam FR GR is composed of a proprietary formulation of elastomeric styrene butadiene-styrene (SBS) polymer modified bitumen and is reinforced with a high quality random glass fiber mat. The topside is surfaced with ceramic coated granules and underside are surfaced with polyolefin burn-off film to optimize heat welding.
View Data Sheet
ELASTOPHENE FLAM STICK
ELASTOPHENE Flam Stick is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen in combination with a high tack self-adhesive layer and is reinforced with a high quality random glass fiber mat. The topside is surfaced with polyolefin burn-off film to optimize heat welding and the underside is surfaced with protective polyolefin release film that is removed during application.
View Data Sheet
ELASTOPHENE STICK
ELASTOPHENE Stick is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen in combination with a high tack self-adhesive layer and is reinforced with a high quality random glass fiber mat. The topside is surfaced with fine mineral aggregate to facilitate self-adhered or cold adhesive applications and the underside is surfaced with protective polyolefin release film that is removed during application.
View Data Sheet
ELASTOPHENE STICK HR FR GR
ELASTOPHENE STICK HR FR GR is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen and is reinforced with tough, dimensionally stable composite glass/glass fiber reinforcement. The topside is surfaced with ceramic coated granules and underside is surfaced with protective polyolefin release film that is removed during application.
View Data Sheet
ELASTOPHENE PS 2.2
ELASTOPHENE PS 2.2 is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen and is reinforced with high quality random glass fiber mat. The topside is surfaced with polyolefin burn-off film and the underside is surfaced with fine mineral aggregate to facilitate cold adhesive and hot asphalt applications.
View Data Sheet
ELASTOPHENE PS 3.0
ELASTOPHENE PS 3.0 is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen and is a reinforced with high quality random glass fiber mat. The topside is surfaced with polyolefin burn-off film and the underside is surfaced with fine mineral aggregate to facilitate cold adhesive and hot asphalt applications.
View Data Sheet
SOPRALENE 180 FR+ GR
SOPRALENE 180 FR+ GR is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen and is reinforced with a tough, dimensionally stable non-woven polyester mat. The topside is surfaced with ceramic coated granules and the underside is surfaced with fine mineral aggregate to facilitate cold adhesive application.
View Data Sheet
SOPRALAST 50 TV ALU
SOPRALAST 50 TV ALU is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen and is reinforced with a high strength glass scrim. The topside is surfaced with an aluminum foil and underside is surfaced with polyolefin burn-off film to optimize heat welding.
View Data SheetSOPRALAST TV ALU SANDED
SOPRALAST 50 TV ALU Sanded is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen and is reinforced with a high strength glass fiber scrim. The topside is surfaced with an aluminum foil and underside is surfaced with fine mineral aggregate to facilitate cold adhesive application.
View Data Sheet
SOPRAFIX BASE 613
SOPRAFIX Base 613 is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen and is reinforced with a tough, dimensionally stable non-woven polyester mat engineered for mechanical attachment. The topside and underside are surfaced with polyolefin burn-off film to optimize heat welding.
View Data Sheet
SOPRAFIX BASE 622
SOPRAFIX Base 622 is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen and is reinforced with a tough, dimensionally stable non-woven polyester mat engineered for mechanical attachment. The topside and underside are surfaced with fine mineral aggregate to facilitate subsequent cold adhesive or self adhered application.
View Data Sheet
ELASTOPHENE ULTRA-STICK FR GR
ELASTOPHENE ULTRA-STICK FR GR is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen in combination with a specially formulated high tack self-adhesive bottom layer and is reinforced with a high quality, random glass fiber mat. The topside is surfaced with ceramic coated granules and the underside is surfaced with a protective split back release film that is removed during application.
View Data Sheet
ELASTOPHENE ULTRA-STICK
ELASTOPHENE ULTRA-STICK is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen in combination with a specially formulated high tack self adhesive bottom layer and is reinforced with a high quality random glass fiber mat. The topside incorporates a unique surface film for promoting superior adhesion of subsequent plies and the underside is surfaced with a protective split back release film that is removed during application.
View Data Sheet
SOPRALENE ULTRA-STICK
SOPRALENE ULTRA-STICK is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen in combination with a specially formulated high tack self-adhesive bottom layer and is reinforced with a tough, dimensionally stable non-woven polyester mat. The topside is surfaced with a unique surface film for superior self-adhered application and the underside is surfaced with a protective split back release film that is removed during application.
View Data Sheet
SOPRALENE 180 PS 3.0
SOPRALENE 180 PS 3.0 is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen and is reinforced with tough, dimensionally stable non-woven polyester mat. The topside is surfaced with polyolefin (P) burn-off film and the underside is surfaced with fine mineral aggregate (S) to facilitate cold adhesive application.
View Data Sheet
SOPRAFIX BASE 614
SOPRAFIX Base 614 is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen and is reinforced with a tough, dimensionally stable non-woven polyester mat engineered for mechanical attachment. The topside and underside are surfaced with polyolefin burn-off film to optimize heat welding.
View Data Sheet
SOPRALENE 180 SP 3.5
SOPRALENE 180 SP 3.5 is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen and is reinforced with a tough, dimensionally stable non-woven polyester mat. The topside is surfaced with fine mineral aggregate and underside is surfaced with polyolefin burn-off film to optimize heat welding.
View Data Sheet
SOPRALENE FLAM 250
Flam 250 is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen and is reinforced with a tough, dimensionally stable non-woven polyester mat. The topside and underside are surfaced with polyolefin burn-off film to optimize heat welding.
View Data Sheet
ELASTOPHENE STICK FR GR
ELASTOPHENE Stick FR GR is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen and is reinforced with a tough, high quality random glass fiber mat. The topside is surfaced with ceramic coated granules and underside is surfaced with a protective polyolefin release film that is removed during application.
View Data Sheet
SOPRALENE FLAM 180
SOPRALENE Flam 180 is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen and is reinforced with a tough, dimensionally stable non-woven polyester mat. The topside and underside are surfaced with polyolefin burn-off film to optimize heat welding.
View Data SheetSOPRALENE FLAM 180 FR GR
SOPRALENE Flam 180 FR GR is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen and is reinforced with a tough, dimensionally stable non-woven polyester mat. The topside is surfaced with ceramic coated granules and underside is surfaced with polyolefin burn-off film to optimize heat welding.
View Data Sheet
ELASTOPHENE FLAM LS FR GR
ELASTOPHENE Flam LS FR GR is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen and is reinforced with a high quality random glass fiber mat. The topside is surfaced with ceramic coated granules and underside is surfaced with polyolefin burn-off film to optimize heat welding.
View Data Sheet
SOPRALENE 180 FR GR
SOPRALENE 180 FR GR is composed of a proprietary formulation of elastomeric styrene-butadienestyrene (SBS) polymer modified bitumen and is reinforced with a tough, dimensionally stable non-woven polyester mat. The topside is surfaced with ceramic coated granules and the underside is surfaced with fine mineral aggregate to facilitate cold adhesive application.
View Data Sheet
ELASTOPHENE FLAM
ELASTOPHENE Flam is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen and is reinforced with a high quality random glass fiber mat. The topside and underside are surfaced with polyolefin burn-off film to optimize heat welding.
View Data Sheet
SOPRALENE FLAM 250 FR GR
SOPRALENE Flam 250 FR GR is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen and is reinforced with a tough, dimensionally stable non-woven polyester mat. The topside is surfaced with ceramic coated granules and underside is surfaced with polyolefin burn-off film to optimize heat welding.
View Data Sheet
ELASTOPHENE LS FR GR
ELASTOPHENE LS FR GR is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen and is reinforced with a high quality random glass fiber mat. The topside is surfaced with ceramic coated granules and the underside is surfaced with fine mineral aggregate to facilitate cold adhesive application.
View Data Sheet
SOPRALENE 180 SANDED 2.2
SOPRALENE 180 Sanded 2.2 is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen and is reinforced with a tough, dimensionally stable non-woven polyester mat. The topside and underside are surfaced with fine mineral aggregate to facilitate cold adhesive application.
View Data Sheet
SOPRAFIX BASE 612
SOPRAFIX Base 612 is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen and is reinforced with a tough, dimensionally stable non-woven polyester mat engineered for mechanical attachment. The topside and underside are surfaced with polyolefin burn-off film to optimize heat welding.
View Data Sheet
ELASTOPHENE SANDED 2.2
ELASTOPHENE Sanded 2.2 is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen and is reinforced with a high quality random glass fiber mat. The topside and underside are surfaced with fine mineral aggregate to facilitate cold adhesive and hot asphalt applications.
View Data Sheet
SOPRALENE 250 FR GR
SOPRALENE 250 FR GR is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen and is reinforced with a tough, dimensionally stable non-woven polyester mat. The topside is surfaced with ceramic coated granules and the underside is surfaced with fine mineral aggregate to facilitate cold adhesive application.
View Data Sheet
ELASTOPHENE SANDED 3.0
ELASTOPHENE Sanded 3.0 is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen and is reinforced with a high quality random glass fiber mat. The topside and underside are surfaced with fine mineral aggregate to facilitate cold adhesive and hot asphalt applications
View Data Sheet
SOPRALENE STICK
SOPRALENE Stick is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen in combination with a high tack self-adhesive layer and is reinforced with tough, dimensionally stable non-woven polyester mat. The topside is surfaced with fine mineral aggregate to facilitate self-adhered or cold adhesive applications and the underside is surfaced with protective polyolefin release film that is removed during application.
View Data Sheet
SOPRALENE FLAM STICK
OPRALENE Flam Stick is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen in combination with a high tack self-adhesive layer and is reinforced with a tough, dimensionally stable non-woven polyester mat. The topside is surfaced with polyolefin burn-off film to optimize heat welding and the underside is surfaced with protective polyolefin release film that is removed during application.
View Data Sheet
SOPRALENE 250 SP 4.0
SOPRALENE 250 SP 4.0 is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen and is reinforced with a tough, dimensionally stable non-woven polyester mat. The topside is surface with fine mineral aggregate and underside is surfaced with polyolefin burn-off film to optimize heat welding.
View Data Sheet
ELASTOPHENE SP 2.2
ELASTOPHENE SP 2.2 is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen and is reinforced with a high quality random glass fiber mat. The topside is surfaced with fine mineral aggregate and underside are surfaced with polyolefin burn-off film to optimize heat welding.
View Data Sheet
SOPRALENE 180 PS 2.2
SOPRALENE 180 PS 2.2 is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen and is reinforced with tough, dimensionally stable non-woven polyester mat. The topside is surfaced with polyolefin (P) burn-off film and the underside is surfaced with fine mineral aggregate (S) to facilitate cold adhesive application.
View Data SheetSOPRALENE 180 SANDED
SSOPRALENE 180 Sanded is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen and is reinforced with a tough, dimensionally stable non-woven polyester mat. The topside and underside are surfaced with fine mineral aggregate to facilitate cold adhesive application.
View Data Sheet
ULTRA-STICK NAIL BASE
ULTRA-STICK Nail Base is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen and is reinforced with a high quality random glass fiber mat. The topside incorporates a unique surface film for promoting superior adhesion of subsequent plies and the underside is surfaced with fine mineral aggregate.
View Data Sheet
MAMMOUTH NEO BASE
MAMMOUTH NEO Base is composed of a proprietary formulation of bio-based TPU polymers in combination with a high tack self-adhesive layer and is reinforced with a high performance glass grid/glass fleece. The topside is surfaced with polyolefin burn-off film to optimize heat welding and the underside is surfaced with self-adhesive ribbon strips protected by a polyolefin release film that is removed during application.
View Data Sheet
MAMMOUTH NEO CAP
MAMMOUTH NEO Cap is composed of a proprietary formulation of bio-based TPU polymers reinforced with a tough, dimensionally stable non-woven composite polyester mat. The topside is surfaced with black mineral aggregate and underside is surfaced with polyolefin burn-off film to optimize heat welding.
View Data Sheet
